No ke aha i ho'ōki koke ai kāu mīkini pahu kī kī i ka hana?

Your production is running smoothly, then suddenly it stops. The machine is down, orders are piling up, and you're losing money and patience with every passing minute.

When your machine stops, it's usually due to a simple, fixable issue with the film feed, temperature, cutters, or a sensor. A quick, methodical check of these common problem areas can get you running again in minutes without calling a technician.

I've taken countless panicked calls from clients whose machines have stopped dead. "It was working perfectly, and then it just quit!" they'll say. In my experience, 90% of the time, the fix is something simple. It's not that the machine is broken; it's just that a setting is off, a sensor is dirty, or the film is loaded incorrectly. Learning to spot these common issues yourself is the most valuable skill you can have. It turns a day of downtime into a five-minute fix.

Why Won’t the Machine Feed the Film Properly?

Your machine is on, but the packaging film isn't moving. You have a full roll loaded, but nothing is happening, and your entire production line is at a standstill.

Ka mua, check that the film is threaded correctly through all the rollers. A laila, ensure the film-pulling rollers have enough pressure and are clean. A misaligned or dirty sensor can also stop it.

Getting the Film to Flow

When film doesn't feed, it’s a frustrating but usually simple problem to solve. I always tell my clients to start with the most obvious thing first: the film path. I once spent 20 minutes on a video call with a client only to realize they had threaded the film pau a tension roller instead of under it. Always double-check the threading diagram. If the path is correct, the next step is to check the two rubber rollers that physically pull the film through the machine. Are they clean? A buildup of dust or film coating can make them slip. Is the pressure right? There's usually a knob or lever to adjust how hard they clamp down. If they're too loose, they won't grab the film. ʻO ka hope loa, check the sensor that tells the rollers when to pull. If it's blocked or dirty, it won't give the signal.

Symptom	Quick Check	The Fix
Film doesn't move at all	Film path and tension	Rethread the film according to the machine diagram.
Film slips or jerks	Film-pulling rollers	Clean the rubber rollers and adjust the pressure so they grip firmly.
Film pulls, then stops	Film-pulling sensor	Make sure the sensor is clean and properly aligned.

What's Causing Your Sealing Temperature Problems?

Your tea bags are either not sealing at all or the film is burning and melting. You're creating a pile of wasted tea and packaging material, and it's ruining your product quality.

Your temperature setting is likely wrong for your film type, or a thermocouple is faulty. Check your settings first, then inspect the heating element's wiring for loose connections.

Finding the Sweet Spot for Sealing

A perfect seal is strong but clean. Getting there is a science. Every type of packaging material—be it paper, nylon, or PLA—has an ideal sealing temperature. If your seals are weak and pull apart easily, your temperature is too low. If they are melted, stringy, or discolored, your temperature is too high. The first step is always to check the setting on your control panel. A change of just 5-10 degrees can make a huge difference. If the setting seems right but the problem continues, the machine might not be reaching that temperature. This is often caused by a faulty thermocouple, the small sensor that measures the heat of the sealing jaw. I tell clients to inspect the wire running from the thermocouple to the control box. A loose connection or a frayed wire is a common culprit and an easy fix.

Pilikia	Visual Cue	Likely Cause	Solution
Weak Seal	Bag opens with no effort.	Haʻahaʻa loa ka mahana.	Increase temperature in 5-degree steps.
Burnt Seal	Film is melted and brittle.	Temperature too high.	Decrease temperature in 5-degree steps.
Inconsistent Seals	Some bags are good, some bad.	Faulty thermocouple or loose wire.	Check thermocouple connection for tightness.

Why is a Machine Cutting in the Wrong Place?

Your machine is cutting through the middle of your logo or right on the seal line. You're wasting expensive printed film and producing unprofessional-looking, unsellable tea bags.

This is almost always a problem with the eye-mark sensor. It's either dirty, poorly positioned, or the sensitivity is set incorrectly, causing it to misread the printed mark on the film.

Aligning Your Cutters Perfectly

On printed film, there's a small, colored rectangle called an "eye-mark" or "registration mark." A small optical sensor on the machine reads this mark to know exactly where to cut so that your branding is perfectly centered on every bag. When the cutting is off, that sensor is the first and only place you need to look. I once had a client whose cuts were all over the place. I had them send me a picture, and I could see a fine layer of tea dust on the sensor's lens. They wiped it with a soft cloth, and the problem was solved instantly. If the lens is clean, the next step is position. The sensor must be pointed directly at the path of the eye-mark. You can usually slide it left or right to get it aligned. ʻO ka hope loa, there's sensitivity. Some films are shiny, some are matte. A small dial on the sensor adjusts its sensitivity to light, helping it get a clear reading.

What's the Right Way to Adjust the Sensors?

You know a sensor is the problem, but touching it feels intimidating. You're afraid you'll make things worse by adjusting something you don't understand, leading to a bigger problem.

Adjusting a sensor is simple. Ka mua, clean the lens. Ka lua, adjust its physical position so it's close to and aimed at what it needs to read. ʻO ka hope loa, fine-tune the sensitivity dial.

A Simple Guide to Sensor Tuning

Sensors are the eyes and ears of your machine, but they're not complicated to adjust. Let’s focus on the two most common ones: the eye-mark sensor (for cutting) and the proximity sensor (for detecting things like an empty hopper).

1. Clean First, Always: Before you adjust anything, clean the sensor's lens with a soft, dry cloth. Dust and grime are the most common cause of sensor failure.
2. Position is Key: The sensor needs to be in the right place to work. An eye-mark sensor must be aimed directly at the eye-mark. A proximity sensor on the hopper needs to be positioned at the level where you want it to signal "low material." Physically move the sensor into the correct position on its bracket.
3. Fine-Tune Sensitivity: Most sensors have a small adjustment screw or dial, often labeled "SENS." This controls how sensitive it is. For an eye-mark sensor, place the eye-mark under it and turn the dial until the indicator light comes on. Then move a blank piece of film under it and ensure the light goes off. This tells you it can tell the difference.

It's a simple process of clean, position, and tune that you can master quickly.

Ka hopena

Troubleshooting your packing machine is a skill that saves you time and money. By learning these simple checks, you empower yourself to solve common problems and keep your production running smoothly.

E pili ana i kā mākou Mīkini Packaging
Ma China Flow Wrapper Technology, loea mākou i ke kī kiʻekiʻe, kofe, a me nā mīkini hoʻopili huahana lehulehu i hoʻolālā ʻia no ka pono, pololei, a me ka hilinaʻi lōʻihi. Hāʻawi kā mākou mau mīkini i nā mea hana meaʻai, mea inu lama, a me nā hale hana OEM ma ka honua holoʻokoʻa, kōkua iā lākou e hoʻokō i ka maikaʻi kūlike, hana wikiwiki, a haʻahaʻa haʻahaʻa waiwai.

1. 🍵 Nā Mīkini Hoʻopiha kī
   Hoʻolālā ʻia kā mākou mau hāʻina kīʻaha kī no ka pololei, hoʻomaʻemaʻe, a me ka mama. Mālama lākou i nā ʻano kī a pau—lau lau, ʻeke pyramid, ʻeke hoʻoheheʻe ʻano pepeiao, Pu-erh keke, a me nā huahana i hoʻopaʻa ʻia me ka ʻūhā.
   Nā Mīkini Ki:
    Pyramid Tea Bag Packing Machine - ka hana pololei, hoopiha ana, a me ka hoʻopaʻa ʻana i nā ʻeke pyramid.
   Kīnaʻi Pepa Kēke Pākī Mīkini – no nā ʻeke kī kānana maʻamau, hoʻopaʻa ʻakomi, a me ka hoʻopaʻa maʻemaʻe.
   Mekini ʻeke kī kī (ʻAno kulu/pepeiao) - hoʻopuka i nā ʻeke kī ʻano drip-style no ka hana ʻana maʻalahi.
    Pu-erh Tea Cake Packing Machine – ʻūhū a i ʻole nā ​​keke i hoʻopaʻa ʻia i ke kiʻiʻoniʻoni me ka ʻōwili pololei ʻana..
   Vacuum Tea Bag Packing Machine - hōʻoia i ka hou a me ka lōʻihi o ke ola.
   Nā pōmaikaʻi:
   ʻO ka ʻāpana kūlike a me ka pololei o ke kaumaha
   Hygienic kuhiliʻole pili 'āpana
    Hoʻolālā modular no nā ʻano kī like ʻole
    Hiki me nā ʻano kiʻiʻoniʻoni he nui (BOPP, PE, PLA)

2. ☕ Nā mīkini ʻeke kope
   Mai nā lāʻau kofe koke a i ka pī kofe, hoʻokō kā mākou mau mīkini i nā koi o ka hana kofe hou.
   Nā Mīkini Ki:
    Drip Coffee Bag Packing Machine - ʻāpana ʻeke kūpono me ka sila anti-spill.
   Stick Sachet Coffee Packing Machine - hoʻopiha piha wikiwiki no nā lāʻau kope koke.
    Mīkini Paʻi Piʻi Kope – ʻūhū a i ʻole ʻeke ʻeke no nā pī holoʻokoʻa.
   Premade Pouch Drip Coffee Packing Machine - hoʻopiha piha piha me ka sila.
   Nā pōmaikaʻi:
    Hoʻemi i ka pauka a me ka ʻōpala
   High-wikiwiki synchronized dosing
    Hoʻohui maʻalahi me nā ʻōnaehana wili a me nā ʻōnaehana wili
    Hoʻolālā maʻemaʻe a maʻalahi hoʻi e hoʻomaʻemaʻe

3. ⚙️ Nā Mīkini Hoʻopili Nui-Alane
   Hoʻolālā ʻia no ka hana kiʻekiʻe, ʻO kā mākou mau alahele mīkini pūʻolo granules, pauda, kofe, kō, mea ʻala, a me na mea ai liilii.
   Nā Mīkini Ki:
   Multi-Lane Packaging Machine (2–12 alahele) - mau ala like ʻole no ka puka kiʻekiʻe.
    Mīkini Hoʻopiha piha - pololei ka hoʻopaʻa ʻana no nā pī, nati, a me na anoano.
    Mīkini Puka Pahu - no ka pauka koke, mea ʻala, a me nā mea hoʻohui protein.
    Nā Mīkini Laʻau Laʻau Nui-Column - kūpono no nā lāʻau kope, lāʻau kō, a me na laau hoala.
   Nā pōmaikaʻi:
    ʻO ka hoʻonohonoho ʻana o ke ala maʻalahi
   ʻO ka hoʻonohonoho ʻana i ka lawelawe no ka hoʻopaʻa ʻana pololei
    Hoʻemi ʻia ke kumukūʻai hana
   High-wikiwiki puka me ka liʻiliʻi downtime

4. 🏷️ Kokua / Nā Mīkini Kākoʻo
   Kākoʻo i nā mea hana e hoʻonui ai i ka pono a hoʻopau i kāu laina hōʻailona.
   Nā Mīkini Ki:
    Mīkini Kākoʻo Aunoa - hoʻopili pololei i nā ʻeke kī a me nā lepili.
    Drip Coffee Bag Roll Making Machine - hana i nā mea kānana i loko o nā ʻeke ʻeke.
   Packaging Material Processing Machines - hoʻomākaukau a ʻokiʻoki i nā kiʻiʻoniʻoni, pepa, a i ʻole nā ​​pepa kānana.
   Nā pōmaikaʻi:
    Hoʻohui maʻalahi me nā mīkini pahu pahu mua
    Hoʻemi i ka hana lima
    Hoʻonui i ka pololei a me ka paʻa

5. 📦 Pahu & Na Mīkini Packaging Packaging
   ʻO kā mākou hāʻina e mālama i ka ʻeke lua-e hōʻoia i kēlā mau ʻeke, lāʻau, a hōʻike ʻia nā ʻeke i loko o nā pahu a me nā pahu pahu i ka ʻoihana.
   Nā Mīkini Ki:
    Mīkini Cartoning Automatic - hoʻopiha i nā ʻeke kī a me ke kope i loko o nā pahu.
    Pahu pahu / Cartoning Production Line - piha automation mai ka hoʻopiha piha ʻana i ka pahu pahu.
    Mīkini Wrapping Box Tea Box Cellophane - ʻōwili paʻa no ka hōʻike kūʻai kūʻai.
    Hoʻoemi ʻia ka Mīkini Wrapping no nā Pahu - ʻo ka ʻeke paʻa no ka lawe ʻana a me ka mālama ʻana.
    ʻOki ʻia ʻo Cellophane Wrapping Machine - hoʻopau uku no nā pahu makana.
   Nā pōmaikaʻi:
    Hoʻonui i ka hoʻopiʻi kūʻai
    Mālama i nā huahana i ka wā hoʻouna
    Hoʻemi i ka ʻōpala waiwai
   High-wikiwiki a me ka pololei hana

6. 🧃 Kū i luna & Na Mīkini Puke Puke
   Pono no ka hale kūʻai mākaukau, ʻeke ʻeke hikiwawe no nā wai, pauda, a me nā granules.
   Nā Mīkini Ki:
    Kū i ka Pouch Packing Machine - no nā wai, pauda, a me nā mea ʻai.
    ʻO ka Mīkini Hoʻopaʻa Paʻa Kūʻai Kope - ʻo ka ʻōpala mālama ʻala.
    ʻO ka pauka kī / Mīkini Loose Leaf Pouch Packaging - maʻemaʻe, ʻoluʻolu hoʻopaʻa hoʻopaʻa ʻia.
   Nā pōmaikaʻi:
    ʻO ka nui a me ke ʻano o ka ʻeke
    Hoʻopili me ka zipper a me nā koho spout
    Hoʻolālā maikaʻi a maʻemaʻe
   High-wikiwiki puka no ka nui hana holo

7. 🏭 Nā Laina Packaging piha
   Hoʻohui kā mākou laina hana turnkey i ka ʻeke kumu mua a me ka lua e hoʻomaikaʻi i kāu hana.
   Nā laʻana:
   Tea Packaging Full Production Line – mai ka hana ʻeke a hiki i ka mokomoko.
   Kopi Packaging Full Production Line – pūʻolo lāʻau, ʻeke, a me nā pahu pahu.
    Puke lāʻau + Laina Hoʻohui ʻia ʻo Cartoning - hoʻopiha piha i ka lāʻau a me ka mokomoko.
    Pyramid kīʻeke + Laina Packaging Box - hoʻopiha piha i nā huahana kūʻai.
    ʻEke Kope kulu + ʻEke waho + Laina Cartoning - ʻoi aku ka maikaʻi o ka automation no ka ʻeke kūʻai.
   Nā pōmaikaʻi:
    Hoʻopau-a-hopena automation
    Ka liʻiliʻi o ka mea hoʻohana
    ʻO ROI wikiwiki a hoʻemi i ka uku hana
   Fully customizable i ka huahana a me ke 'ano o ka pahu

8. 📦 Mea Hoʻopili (Nā huahana kākoʻo)
   Hāʻawi pū mākou i nā mea hoʻohana kūpono no ka hana maʻalahi.
   Mea Ko'iko'i:
   ʻO nā ʻōwili pepa kānana ʻeke kī - maʻemaʻe a paʻa ka maikaʻi.
   Nylon / PLA Mesh Tea Bag Materials - nā koho biodegradable.
    Drip Coffee Filter Rolls - maʻalahi e hoʻohui i nā mīkini.
    Nā lepili, Nā Loko, a me Sealing Materials - kākoʻo i ka hana kiʻekiʻe.
   Nā pōmaikaʻi:
   E hōʻoia i ka holo mālie o nā mīkini
    Hoʻemi i ka manawa hoʻomaha ma muli o ke kūpono ʻole o nā mea
    Mālama i ka maʻemaʻe kiʻekiʻe a me ka palekana o ka huahana